Printing Technology
Fused Deposition Modeling
Body
Build Volume (W × D × H) : 256 x 256 x 256 mm³
Chassis : Steel
Shell : Plastic & Glass
Toolhead
Hot End : All-Metal
Extruder Gears : Steel
Nozzle : Stainless Steel
Max Hot End Temperature : 300°C
Nozzle Diameter (Included) : 0.4 mm
Nozzle Diameter (Optional) : 0.2 mm, 0.6 mm, 0.8 mm
Filament Cutter : Yes
Filament Diameter : 1.75 mm
Heatbed
Build Plate (Included) : Bambu Dual-Sided Textured PEI Plate
Build Plate (Optional) : Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate
Max Build Plate Temperature : 100°C
Speed
Max Speed of Toolhead : 500 mm/s
Max Acceleration of Toolhead : 20 m/s²
Max Hot End Flow : 32 mm³/s @ABS (Model: 150×150 mm single wall; Material: Bambu ABS; Temperature: 280°C)
Cooling & Filtration
Part Cooling Fan : Closed Loop Control
Hot End Fan : Closed Loop Control
Control Board Fan : Closed Loop Control
Chamber Temperature Regulator Fan : Closed Loop Control
Auxiliary Part Cooling Fan : Yes
Air Filter : Activated Carbon Filter
Supported Filaments
Ideal : PLA, PETG, TPU, ABS, ASA, PVA, PET
Capable : PA, PC
Not Recommended : Carbon/Glass Fiber Reinforced Polymer
Sensors
Chamber Monitoring Camera : Low Rate Camera 1280×720 / 0.5 fps
Timelapse : Supported
Filament Run Out Sensor : Yes
Filament Odometry : Optional with AMS
Electrical Parameters
Power Loss Recovery : Yes
Physical Dimensions
Dimensions (W × D × H) : 389 × 389 × 458 mm³
Net Weight : 12.95 kg
Electronics
Input Voltage : 100-240 VAC, 50/60 Hz
Max Power : 1000 W @220V, 350 W @110V
USB Output Power : 5V / 1.5A
Display : 2.7-inch 192×64 Screen
Connectivity
Wi-Fi, Bluetooth, Bambu-Bus
Storage
Micro SD Card
Control Interface
Button, APP, PC Application
Motion Controller
Dual-Core Cortex M4
Software
Slicer : Bambu Studio (supports third-party slicers that export standard G-code (e.g., Superslicer, Prusaslicer, Cura), though some advanced features may not be supporteds.
Supported OS : MacOS, Windows